Vamco International
Servo Control Features
The terminal can display multiple test sizes, bold, blinking and inverse video on multiple lines.
User Friendly Interface: The full menu driven interface
directs the operator with clear, descriptive messages in plain English.
Speed and Acceleration are programmed as one parameter which is a percentage
of the feeds capability. 100% is full capability of the feed, 1%
is the slowest the feed will move.
Set-Up mode allows the operator to jog the material exactly one feed-length,
then waits for the press to single stroke before allowing another fee-length
to be jogged. This feature allows for easier threading of complex
multi-station dies.
Job Storage: 99 job setups to be stored and recalled
at a touch of a button.
The optional Part Batching Job Storage allows multiple feed-lengths to
be stored in each job. Example: Part number 1 could be (five) 0.25"
progressions then (two) 1.000" progressions followed by (thirty)
0.050" progressions.
Batch Counting: Program in the number of parts you want to make and the feed will top-stop the press when that many parts are made.
RS-232 Interface Capabilities: Allows interfacing to other industrial press devices such as PLS/Die-Monitors.
Advanced Feed-Angle Monitoring: Continually monitors the feed-angle and the material position. The feed will E-stop the press if feed-rolls are not in position when the feed-angle is complete.
Password Protection: Prevents operators from accidentally changing crucial feed parameters.
Brushless AC Motor Technology: Zero maintenance brushless motors offer outstanding performance and reliability.
Pendent Mounted Jog Control: Facilitates threading of material through the die.
Programmable Limit Switch: Feed set up is enhanced by mounting an electronic PLS in the feed console. This will allow the operator to easily adjust press to feed timing, feed angle, and roll release timing.